Combines Problems feeding Barley

Dan

Guest
Could use a better description on the problem. For straw coming around the back of auger and over the top before it enters feed chain and you have tried all the adjustments you should add another channel in front of the strippers that are allready there under the auger. If it will not feed in at finger area you should be sure that you have filler inbetween the header and feeder housing adjusted to prevent the hole or slot on the floor which can hold up the straw. Also be sure you have the short flighting extentions installed into finger area. If all else fails then install 4" flighting all the way to center line of finger area. Make sure you gusset and support the flighting very well. let me know if you have any other questions or symthoms for me.
 
 
Top