Combines 750 Monitor

goober

Guest
Sounds to me like the main switch on the thresher drive lever doesn't work or is set wrong. When you rev up the machine to full throttle do the lights and alarm go offIJ My machine does this after i have washed it up for the winter but after it dries out it always works fine.
 

Kornkurt

Guest
On a grey cab 750, the switch that turns the monitor on and off is under the cab and connected to the machine engagement lever. There are two wires that plug into the switch. Pull them out and see if the monitor goes dead, then touch them together and if the monitor works, the switch is bad. If it is, it takes an 1 1_8 wrench to screw it out. If the switch is OK, stick a small screwdriver in the switch hole and have someone engage the seperator, you should be able to feel the slot turn that makes the switch work, if not the small shaft that contacts the switch may be sheared off. Hope these ideas help you.
 
 
Top