Combines Perkins starting

Kidd_Farms

Guest
There is a fuel advance button on the side of the pump. The fuel shutoff must be in the "On" position, throttle approximately half open and then push the button. It should start.
 

bfarm

Guest
I had the same problem with my 760 ,6 cyl hydro, went as far as taking the pump in to an injection shop-everything was fine. Further searching found that the o-ring from the fuel tank to the transfer pump was cracked letting the fuel bleed back to the tank.Same story you have lots of cranking to get it started, then ran fine for the rest of the day. Try this will only cost you a couple of o-rings. Good luck!!
 
 
Top