PDA

View Full Version : deere mods



anth
06-27-1997, 01:21 AM
i would like to hear from anyone who has installed kuchar's super kit on a 9600.

Frank
08-25-1997, 08:15 PM
last fall I broke some metal fingers on the cutting platform auger. Before I could shut down the combine, several holes and dents appeared in the auger drum. Has anyone had experience with poly finger replacements, like from May-WesIJ Thanks

Johnny
10-24-1997, 11:33 PM
I want information on John Deere 7720 Combines.

silver_fox
01-05-1998, 10:42 PM
I have a 95 model 9600 that has grain loss over the

lentz
01-20-1998, 07:55 PM
Could anybody please advise me on the prices on the new cotton pickers

Aleksenko
04-29-1998, 01:06 AM
Could anybody please advise me on the prices on the new Deere 9500 harvester.

Al
06-21-1998, 08:50 AM
I would like to start my son cutting soybeans this year and would feel better if we had the three height adjustments of the dial-a-matic. I presently have the AHC auto header control which works good . Anyone done this switch and is it a big deal IJ

Grainman
11-10-1998, 12:07 PM
Is there any modifications I can preform to my JD 55 and 3300 combines to keep from slugging the cylinder on windrowed seed. I have the concave opened as far as possible, and keep cylinder speed around 700 rpm for good threshing and to keep too many seeds from being shattered. Your comments are surely appreciated.

Bean_Boy
02-12-1999, 08:55 PM
I have a 6620 corn machine and want to harvest Dry Beans. Other than some perforated screens and a slow down kit for the cylinder, what else can I do to keep my tare down and quality goodIJIJIJ Do you take filler plates outIJ What kind of settings for fan, ect.IJIJIJ Any help on this would be greatly appreiated!!!!! Also any little add-ons or tricks to make harvest better would be great. Thanks.

toosh
09-03-1999, 10:04 AM
I want to change a 6620 from 28l x 26 to 24.5 x 32 tires. Do I have to change the rear tires also we currently have 11.00

turbine
11-06-1999, 10:39 PM
can anyone tell a way to ad auto steering to my

turbine
11-06-1999, 10:46 PM
is there some type of auto-steer that is available

turbine
11-06-1999, 10:51 PM
can anyone tell me if you can buy or build a simple

wyoboys
04-14-2000, 10:59 AM
We have a 1997 9600. The grainloss monitor works great until you turn the lights on. When the lights are on, the grainloss monitor goes to full positive. Has anyone else had this problemIJ

KK
06-05-2000, 07:08 PM
Does anybody know the horsepower for the factory 6620, 7720, and 8820 J.D combines

Carolina_farmer
07-28-2000, 12:34 PM
WE have 5 JD 9600 combines, purchased in 1996. At the present time we have replaced the hydrostatic transmission on 4 of them, the 5th one has a reading of about 4500 psi.

rdmah
09-05-2000, 08:45 PM
Does anyone know about a web page that gives details about increasing the horse power on a John Deere 9650 STS. I have been told that one exists, but haven't had any success finding it. The address to the web site or any other relevant information reguarding this subject would be greatly appreciated.

dirtdigger
10-27-2000, 01:47 PM
What is the factory hp on a 6600IJIJ

dirtdigger
10-27-2000, 01:55 PM
what is the engine hp on a 6600IJIJ

exgreen
10-30-2000, 12:59 PM
I have a real problem with dirt build up on the rub bars on my 9650 JD combine. I am running the hardened, black bars, cannot use the cylinder fillers due to harvesting Canola.

Duane
11-07-2000, 11:50 AM
Anyone had any dealer mods that had to be done to their 936D headIJ I bought a finger model this year. Hitch area looks real weak. Also mud build up on leaf springs was a problem. Anyone put poly under the center draper sheets or under the leaf springsIJ

vern
01-26-2001, 09:58 AM
looking for an modified clean grain elevator,possibly name brand "waco" it is stainlees steel and replaces elevator on 8820jd. also replaces gear box and tank auger. can anyone tell me how to contact the manufactureIJ

virutas
06-21-2001, 12:57 PM
I'm interested in knowing a system used in U.S.A by a company named Andersons in order to obtain the cobs. What kind of combine can we useIJ thank you in advance.

smallfarmer
10-22-2001, 10:27 AM
I have a 4400 292 gas combine that runs hot constantly. Any suggestionsIJ

rcp
11-01-2001, 04:57 PM
I have a 6620 and broke the top feeder house shaft. I have a 6600 with a good feederhouse on it and am running into problems changing them over because of the different diameter of the drive pulleys. Can't find the right belt.

seed_corn_gangster
01-29-2002, 08:00 PM
I was wondering if anyone could let me Know of a way to unhook the hourmeter on my 1998 John Deere 9510 combine. I would like to do this without interrupting any other crucial electronics. Also I would like to be able to hook it back up at a later date. Thanks for any help.

socoll
04-15-2002, 08:58 AM
I look 2 combines harvester. 6m grain header.Work condition. 30000$ per each. Victor.

elkhunter
09-24-2002, 12:58 PM
Have any of you people heard or had or have a 1990 John Deere 9400 combine. We have just put our 5 crankshaft in this machine. The h balancer keeps breaking off. We just got this machine fixed again but they still have not put new engine in machine. This is going to happen again. Please fill me in on this if any of you have had this problem.

Scotsman
11-12-2002, 01:52 PM
I am in Scotland we have used a CTS combine for the last 4 seasons and are thinking of changing for a 9780 Hillmaster what do you all think of this model and is the Hillmaster option worth the money we have slopes up to 15%

crazyfarmer
12-14-2002, 09:17 PM
been having probelms with the CTS II combining peas. seems to crack peas. wondering if any mods are available to correct problem

sheldan
12-19-2002, 03:03 PM
Would like to trade our 1980-JD7720 for a 1996-JD9500. How much bigger are theyIJ What mod's _ ungrades should I look for before I buy itIJ

Captain
07-06-2003, 08:07 PM
I am currently looking to purcahse a different combine and am looking at a 98 CTS II. Can anyone tell me the good and the bad about this combine IJ

Captain
07-06-2003, 08:09 PM
I am currently looking to purcahse a different combine and am looking at a 98 CTS II. Can anyone tell me the good and the bad about this combine IJ

RJD
11-28-2003, 08:28 AM
looking for a power chip to put in my 1991 9500 with a NipponDenso pump and has anybody used them thanks

John_Burns
12-22-2003, 11:31 PM
I am getting ready to do a rebuild on a 9610 with 1700 sep hours. Was considering putting a solid cylinder in from St John Welding or somewhere else. Would appreciate any information on the good_bad_ugly of using one. Are they worth the extra cost and effortIJ Go with oem or Gleaner type barsIJ Who makes them besides St JohnIJ John

bull
07-15-2004, 09:16 PM
I'm setting up a 7720 titan2 for edible beans and wondering what all I should do. Clean grain,beater,cylinder slow downsIJ What all is avalible from deere or after marketIJ Thanks for the info.

jagter22
07-25-2004, 09:13 PM
What are the differences between an 8820 combine and an 8820 TitanIIIJ

razy
07-30-2004, 09:38 PM
is there a product or farmer idea on how to get more grain out of the grain sump on a 7720 t-2

Minto
09-04-2004, 07:27 AM
We have used JD 9000 series walker combines for 7 years, currently run a 1999 9610. we also need 3500round straw bales for our 22 straw based hog finishing barns.We typically cut 50 to 80 bu_acre wheat at 2 to 2.5mph taking in 4 ft of straw with 1-2 bushel loss. I have tried to push the combine to 4 mph in these condition but measured up to 10 bu. loss. We have combined 30 bu wheat at 4 mph with2 ft of straw with minimal loss and a 15 bu crop with 1 ft of straw at 8 mph. Our straw is often damp even when grain is dry. I know swathing and or Roundup can help matere the straw, but particularily in winter wheat swathing often means excessive sprouting. Are there any proven and hopefully economical methods to substantially reduce the walker losses and increase the combine rateIJ Has anyone modified one of two combines and measured the differences in the same field IJ Is anyone in a similiar situation where you need the round bale straw, tried all the modification, still could not get an acceptable job and traded to a more suitable combine, if so what combine has high capacity and still leaves the straw in baleable condition even in dry yearsIJ In this late wet year at 2 mph I won't have enough days to get the crop off. So far 20 acres of 85 bushel winter wheat with 1980 acres to go

freddie
10-01-2004, 07:21 PM
Brand new 9560STS this year, traded 9400. Deere shop foreman told me today Deere memo says NO grain tank extensions, have evidently seen failures, will void warrantyIJ I was already dissapointed with power and now this. Anyone heard if they are going to offer MOD, or am I going to have to live with the fact that I traded downIJ

greenman
10-23-2004, 01:18 PM
looking for a power chip for John Deere 9400 4 wheel drive and a 9860 combine.

R
10-29-2004, 07:14 AM
I am in search of some information on Mud Hog 4WD system on a 7720 (84). We have had heating problems in the hydro unit since we purchased the used machine. The hydro unit has been replaced with a new one from Eaton and we have had the oil cooler checked and cleaned. The cooling problem only occurs when the 4WD system is NOT in use (road transportation) The Temp sensor has been changed and the control seleniod has been rebuilt. We regularly clean the radiator and I have gone so far as to replace all the foam to keep the dirt to a minimum around the radiator. I am out of ideas and this is not a common system on a combine in this area. The dealers have been at a loss for sugestions so any help would be apperciated.

NIGHT
11-27-2004, 08:20 PM
TRACKS -- HAVE A GREAT SET OF RUBBER TRACKS 36 INCH WIDE AND VERY GOOD WITH OIl BATH ROllERS FOR $23000.00 CAll RANDAll AT 618-838-2338

silver
01-02-2005, 04:51 PM
Anyone have experience with these or others to shareIJCan you run down the road at normal speedIJ ect. thanks