Combines 2062 IJ

I asked that question to our dealer and he said they don't tell anyone too. It would be very easy to do at the end of the year whenever you open both belts in order to clean them out really well i did find the nut came loose on the roller and those grease zerks were easy to get to at that point.. So were not...i'll let you know if its a bad idea

Ya, the 2062 manual tells you to change the bearings yearly. In real life, if you grease them, the bearings last for years. If I was going to "stock" bearings the 2 that I would have would be on the roller on the center belt that brings the crop in, they spin the most, do most of the work, and run in a little dust. During harvest you can feel the bearings to see if they are running warm. And you should store the draper with the belts off and that is a good time to look at the bearings and spin the rollers over.