Combines l3 hydro handle

dairyman

Guest
Nut's (1-1_8") as tight as it goes... Should there be shimsIJ
 

Hyper_Harvest_II

Guest
On each side of the control arm that cable hooks to there should be a washer and on the inside between washer and arm there should be a bevel washer that applies tension as you tighten two jamnuts.Sounds like bevel washer is broke or missing.You can look at parts breakdwn on agcopartsbooks.com Hyper Harvest II
 

dairyman

Guest
Don't know how I missed it in the parts diagram, but there is a snap-ring that came out of it's groove and allowed everything to shift sideways. Had to take the assembly out of the console before I figured it out.
 
 
Top