brassring
Guest
can't help much but to share, yes I did have trouble breaking the spindles off of a l-2 and our first R-52 2wd. combines, what I found on both was that the axles were turning too far and laying the rear wheels over too far and I felt causeing excessive preasure on the spindles I restricted the travel and seemed to help, our now R-52 has 4 wd. and I use it almost all the time and feel this helps a lot to relieve the stress,what tires do you have on itIJ maybe if you go to lug tires like 4wd. use and turn them around it may relieve some stress too.