Combines K2 Variable speed sheaves

terrybee

Guest
I would be willing to bet that all of the O-rings are standard sizes. If you can get it out intact, any tractor place, or large auto parts store, or hydraulic cylinder repair place should be able to match it. If it is leaking between the sheavs it is probably the 923949 O-ring. The spacer is probably the 1155324 shim. Mine was also all bent up, but I could not get a replacement at the time, so I left it out and all seemed to work OK. Good luck.
 

Kaye2

Guest
Thanks Terry, I have new coming from dealer by 11 tomorrow, going to take off work and get it back together, hopefully, should be a cheap fix!
 
 
Top