Combines R 52 engine fan

eddie

Guest
If you are changing only the blade and not the fan assembly, the blade just has one bolt holding it on. Don't know current cost. Expensive.......
 

tbran

Guest
the part no. is 71364623. It is a special nitrided aluminum fan. Someone with Deutz engine connections MIGHT CHECK OUT n4153494 or 2235856 - don't take this as gospel as they are just in my notes. These are non-nitrided units. It is approx a 4 hour job first time. If one has done it before might cut that by an hour. IF everything goes as it is supposed to.
 

Charlie

Guest
Replaced mine on an R50 this summer. Took about 1.5 hrs. Cost of the fan, think was $260. Not to difficult to do.
 
 
Top