Combines tx 66 concave

The concaves is relativley easy to change. you don't have to pull the wheels, just the feeder house. then loosen the concave adjusting bolts, remove the front cover plate, remove the hinge bolts and anchor bolts to lower the concave down. remove the two tabs on the inner walls of the stone trap for clearance and remove the concave.

Removing the concave is actually easier than I thought it would be. Removing feederhouse was about the toughest thing to do. If you have a forklift or FEl w_ forks, it would make the job alot easier. We used an engine lift. It worked but the angle of the lift was a problem.