Unit_2
Guest
Brodale, I've never cut anything close to 100 bpa wheat so I may be way off base on this one, but I think you are running your rotor way to fast and over threshing everything and thus overloading the shoe. It is a rare day that I run the rotor over 800 on my 2388s. Have you tried slowing the rodor down to at least 860 to 900IJ The other thing is it actually over loading the return or is it just the monitor telling you that it is overloading it. Do you have the monitor set on the most sensitive setting or the least sensitive. There are three setting on the monitor and then there is a forth setting that turns off the alarm in the least sensitive setting.