Combines Need advice on platforms

Justin

Guest
Please look into a Crary Finger Air Reel when you get a new head. You can simply order them less the reel. You won't go wrong.
 

dingo

Guest
It wont be a problem with a 30ft front unless you country is hilly and then maybe when you trade in after one of those big harvest you get and buy a new machine with a contour master on it.
 

dingo

Guest
It wont be a problem with a 30ft front unless you country is hilly and then maybe when you trade in after one of those big harvest you get and buy a new machine with a contour master on it.
 

logan

Guest
Also check out Advanced Wind-reel Systems. Call (519)347-2251 or e-mail loganjd@orc.ca . We have a new system for JD maximizer combines which mounts the blower on the combine and drives from the primary countershaft.
 

Slack

Guest
does anyone have any problems with the STS like damaged grain , rotor blockages , grain loss , HP if you do can you please write back as fast as you can thank you from slack
 

SlACK_AND_SEAGUll

Guest
does anyone have any problems with the STS like damaged grain , rotor blockages , grain loss , HP if you do can you please write back as fast as you can thank you from slack
 

Erky

Guest
We have been running a 230 head on our 9500 since we bought it and works fine. we have a 17ft auger but is a little short so we put a Calmar boot on to move grain flow out. A 20ft auger would be lots. A lot of neighbours cutting lentils and peas are loving thier Honeybees. If you cut beans it is your best bet as you don't need a rigid and a flex just a draper.
 
 
Top