Combines 750 COMBINE PROBlEM

AJTIII

Guest
Check to see if the "fingers" are all on the back side of the cylinder "grate". These fingers guide straw and cobs from the cylinder up onto the walkers and keeps them off the grain pan.Also make sure you don't have any build up of material on top of the fan housing that might be pushing against the grain pan.Good luck.
 

gr_ecks

Guest
Check for wear where the shaker drive arm goes on the drive pulley. I found out that to be my problem with breaking the shaft. My 2. gr
 

Old_750

Guest
I broke the shaft about ten yr ago, stuck in a new one and had no problems. If the machine is new to you, there are several things to check out re: the grain pan, the shoe pitman ( notorious for wear at both ends ),play in the big left hand bearing cast housing that secures the shaft and the bearings (4) that secure the shaft to the grain pan. Also, chect the rubber mounts and steel arms that secure the front of the pan to the frame just under the concave. If you want, I can send you the appropriate details from the service manual.
 

Old_750

Guest
Sorry, wrong e mail included above and this one will only be good for a month
 
 
Top