Combines unloader won t run always

NDDan

Guest
Sounds like you got it. Just shim switch a bit closer to metal plate with a couple washers. Good luck
 

brad_c

Guest
For us, every once in a while the limit switch for the unloader some chaff_dust collects around the pivot point on the switch. We just take the air gun and blow around the pivot points well and everything works again. Happens about every other year on the switch back at the tube rest support too. Might not be it but something to check maybe.
 

Brian

Guest
Had this happen on our R-60 once. Turned out to be a safety module of some sort in the cab consel. This module is responsible for not letting unload auger run when folded etc... I'm pretty sure those safety modules are differnt in the 2 series as they tied more stuff to them but just the same it is a possiblity. Brian
 
 
Top