tbran
Guest
I reread my note. I must have had a Sr. moment. That was the fix for slow leak down. I apologize. In under that same poppet end plug there is a relief cartridge that can be slid out. THAT is the one you have to screw in to increase pressure. This is called the relief asy curcuit in the parts call out. If you have trouble , send me an email and I will send a picture of this to you. Remove the end plug and poppet, use an oring pic to reach in and grab the cartridge and remove, screw the flat headed screw plug in 3_4 to one round. Replace - do not reverse the plug end for end!. You should notice an improved rate of speed change. A word of caution, a weak seal could leak after this pressure has been increased - the one on the main clutch shaft.. might get a spare. Again I apologize for giving the wrong info.