Combines F2 Clean Grain Elevator Plugging

[Hyper_Harvest_II]

Your F2 should have a 44 tooth driven sprocket on clean grain conveyor. M2 uses a 35 tooth driven sprocket that will fit in place of 44 tooth. Make sure that you have movable flighting in grain tank slid over by discharge into grain tank as you will need to keep this grain moving into grain tank. This should give you approx. a 20% increase in speed. Hyper Harvest II

 

[Tom_in_Michigan]

Obtained a 35 tooth gear off of the neighbors parts l2. Needs a little repair, but it should work. Thanks for the suggestion. Tom

 

[tbran]

look at the auger at_ in the bin loading tube. If it is worn the courn will not be removed and will travel back down the elevator chute - thus choking.