Combines cutting widthIJ

[Tom_Russell]

What does it measureIJ I assume it would be 15 (4.57m). Or are you wondering where to measureIJ

 

[Thud]

Ideally it should cut 15ft, however it never does. Say you are growing your beans in 15in rows. You should be able to cut 12x 15in rows of beans, in practice its impossible to do without knocking some of the row over with the dividers on the head. So you will end up running a bit too one side and only taking 11 rows... or 13.75ft. We always figure our 20ft head cuts about 19ft of actaul crop ( 30 rows of 7.5 inch beans)

 

[Tom_Russell]

I have not tried cutting 15 beans but I have cut lots of 30 beans with a 15 head. A 15 head will cut 6 rows of 30 beans without any trouble. Tom in MN

 

[Mark]

I measured my head today. The distance between the dividers at the cutter bar is 14'9"

 

[larry]

Thanks! Thats what I was looking for..