cnhtek
Guest
do you have the radio and the antenna grounded properlyIJ Most of the radio issues I see are casued by ground faults. Make sure that the radio is grounded both through the wiring and to the rear mounting pin. Most radios have a rear mounting pin that is attached to the radio casing, ground it to the common post in the fuse panel. Some antennas have to be grounded also, depending on what kind of antenna you have you may have to ground the base to the same wire you grounded the radio to. By the way, just guessing, but was it louis Malonson at NH who told you to install the static filterIJ