Combines Fault code for header

RAB

Guest
My 2388 did the same thing with me this year. I don't remember the code n but it was "relay stuck closed" or something like that and the reel would not turn. I replaced one of the relays in the fuse panel under the right console. It was either header enable or hydraulic enable not sure which.
 

GBCowboy

Guest
That is real simular to the problem we had, but we were getting E1 Hdr error. Read down under my posts to see what we did. Since I posted last, the problem has showed up once( and we also finished our beans) One additional thing we did was put some dielectric grease on the big plug going onto the cab because we had that apart to clean. Patrick Micke
 
 
Top