Combines 8780 unloader will not engage

[swtvid]

Is the solenoid coil on the hydraulic valve getting powerIJ If it is, could be bad ground or bad coil. If no power there jumper to battery to see if that part is ok, then work your way back to cab jumper power if wont damage electronic to check wires. You probably have fix by now. Good luck swtvid

 

[MF_9790]

Hey, I think there are a couple sensors that need to have a connection or the auger will not work, we had this problem on our 9895, but got it fixed. MF 9790