Combines Alfalfa Seed and 9600 again Comments please

[jd_tech]

Is there any easy way to feed it through the tailings elevatorIJ it would be alot easier to do that than to spend time making something. I don't think that the chain in the feederhouse will take it up the throat. just my opinion though. good luck

 

[jd_tech]

just take the back chaffer out and feed it into the return auger for the tailings with that auger that you mentioned.

 

[Deerebines]

Talked to Pop today about that one. Couple downfalls. 1: noone wants to be on the backside of that machine trying to feed the auger while all the chaff is coming back out 2: I don't think that lil electric motor could last long in all that dust and crud coming back out of the combine. Did come up with another wild idea. Going to plug off the front of the feederhouse so nothing can come out of it while running and then just open one of the two lil doors on the top side middleway of the feederhouse and let the cleanouts go in there via an outside auger and surely they will make it into the cylinder then. Thoughts on that brainstormIJIJ

 

[Belly_Acres]

Guy at the local seeding cleaning plant augers his material through his straw walker inspection hole, sending the material through the return to be reproccessed. It's worth a try. Rod