Combines Auger Drive Gear Case leakage 9600 combine

JAC

Guest
simple seal and brg. replacement behind the pulleys should fix leakage
 

davedan

Guest
H101878 hub will need to be replaced as well as the two bolts that lock in the grooves on the shaft. What happens is the bolts get loose in the groove on the shaft causing the hub to wobble even with a new bearing and then it works the seal too much causing even a new seal to leak. The problem also is that you cant just turn the hub to make the two bolts ride in different spots on the shaft because the woodruff key is only in one spot. You might need a new shaft if the bolts have worn into the shaft enough. New bolts alone may not be enough. If you have it apart this will make sense when you look at the parts.
 
 
Top