Combines case ih headers

Bill

Guest
Recently purchased used 1020 platform with 1.5 knives. Trying to cut wheat but is doing poor job. I have locked header in rigid position hoping it would help but hasn't. Does anyone have any suggestions.
 

GS

Guest
I am not familiar with draper headers. How well do they work in short dry land wheatIJ Is there a posiblity to have grain loss under center belt and feederIJ
 

Booger

Guest
If I purchased a 1010 15ft in the Eastern Ontario region do you think it would be resaleable in the future to trade on a flex. This 1010 is in really great shape for 2500. Thanks for any repl
 

KENT

Guest
An old friend called me the other day and wondered if I new of any face plate adapters for a John Deere Row Crop Head to go on a 2166. He purchased a six row head for his "narrow row beans" (30"). Any help greatly appreciated here in Northwest Indiana. leave phone number and email address if you can help. Thanks Kent!!!
 

fox

Guest
i have traded my 1083 for a new 2208 head and have a spare auger for the 1083 for sale. If interested post reply with e-mail address. Am located in central Il.
 

CRG

Guest
Can anyone tell me how to take the pulley off of a 1020 header wobble boxIJ Mainly I need to know which direction you turn it to loosen it. I have tried both ways and didn't budge it. I think the direction it runs looking at it from the side is counter clockwise.
 

plowboy

Guest
I just purchased a very nice 1990 1020 flex head and I noticed when I pinned it up, that it has a very distinct hump when sighting along the guards. I can't figure this out because when I sight along the spring-loaded channels that are pinned up, they appear to be straight. Apparently, the bend is in the guards or front bottom metal somehow. Is this head damaged or warpedIJ
 

steve

Guest
I have developed a positive feed drum to grab crop material from the table auger and into the feeder house allowing the elevator slats to take crop material evenly without plugging or repeating.
 

Oly

Guest
I have a 30 ft. 1020 that I've run on soybeans for 5 seasons. Today while preparing the machine for this season I noticed some nasty cracks in the lower frame on the left hand side. I was wondering if anyone else has run into this problem. I've always felt my head ran smooth and had no vibrations. I've got quite a ridge on my endrows which make my outside dividers bounce a lot on the ends. Could this be doing itIJ