striker782 Guest Aug 10, 2005 #1 Yes, the gap should be slightly wider at the rear. This allows the stalk and trash to exit easier since that is where the rollers pull it down.
Yes, the gap should be slightly wider at the rear. This allows the stalk and trash to exit easier since that is where the rollers pull it down.
lee Guest Aug 10, 2005 #2 I just got rebuilding my 863 And the book called for stripper plates @front 1 1_4, rear 1 3_8, I just cut some 2X4s dwn to 1 1_4 and 1 3_8 on band saw, drove some 8 penny nails in from side to let hang on plates and adjust an tighten accordingly
I just got rebuilding my 863 And the book called for stripper plates @front 1 1_4, rear 1 3_8, I just cut some 2X4s dwn to 1 1_4 and 1 3_8 on band saw, drove some 8 penny nails in from side to let hang on plates and adjust an tighten accordingly