Combines F2 Fuel Shut Off Solenoid Install on 4 cyl Diesel

Hyper_Harvest_II

Guest
When installing the cover to the pump, you will have to bring cover in from the front angling it down and onto top of pump. Then you will have to move lid against spring tension of solenoid towards rear of pump to get holes to line up. Clear as mud, rightIJ Hyper Harvest II
 

Forgall

Guest
It's clear now, it helps when you install the solenoid the right way!! DA Didn't pay enough attention when I took it apart. Thanks Another problem is the throttle shaft is starting to leak fuel. Can this be changed on the machine or does the pump have to come offIJ
 

Hyper_Harvest_II

Guest
This can be done while pump is on engine. If you haven't done one before I would make sure of all the steps to do it. First and formost is making sure everything around pump area is spotless. The lid will have to come back off when you do throttle shaft seals. There are a couple of nylon thrust washers and o-rings on throttle shaft and rear plug. A parts break down would also be helpful. When you get ready to do this ask and we can walk you through it. Hyper Harvest II
 
 
Top