CAJUN__BOY
Guest
we installed stainles liner in bottom of both troughs on 2188 purchased from local dealer, they are aftermarkets!
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines Grain tank worn through
Wolffman
Guest
I just saw one in Sloan Express new catalog. Poly-last for $350. Why don't you try one and tell us if it's good. Their website is www.sloanex.com or ph. 800-934-9777
kirk
Guest
check out polyskid.com look under what's new or new products it's the same as sloan sells.I put one in our 1688 last spring,easier than welding in a patch.It uses polyliners and ss strips that rivet or screw down. on ours the augers rubbed the liner until I loosened the bearings at the ends and picked them up.No wear yet.Ours was pretty rusty not worn through,but patched the neighbors 2188 our old 1480 that was worn through.
95_KW
Guest
We used 1_8th inch sheet metal, rolled it to the right shape then rivited them in. Replaced at about 2000 hours and are still in good shape at 5250 hours. (1660)