tv140 Guest Nov 7, 2004 #1 Could be many things - better get the dealer out. Could simply be electrical - bad circuit board or such. (any error codesIJ) Could also be a multifunction(relief) valve in the hydrostat.
Could be many things - better get the dealer out. Could simply be electrical - bad circuit board or such. (any error codesIJ) Could also be a multifunction(relief) valve in the hydrostat.
G Guest Nov 8, 2004 #2 Have you tried to calibrate the multifunction handleIJ I have one machine that goes out of calibration and needs to be done quite often.
Have you tried to calibrate the multifunction handleIJ I have one machine that goes out of calibration and needs to be done quite often.
willie Guest Nov 8, 2004 #3 That sounds like exactly what happened to our cr970.Pull your hydro filters of and look for filings.Hydro went out with 200 hours on it.
That sounds like exactly what happened to our cr970.Pull your hydro filters of and look for filings.Hydro went out with 200 hours on it.
tv140 Guest Nov 8, 2004 #4 The early CR's had a campaign to replace the hydros due to a manufacturing problem. The later ones didn't have that problem.
The early CR's had a campaign to replace the hydros due to a manufacturing problem. The later ones didn't have that problem.