Combines l3 hydro RWA trouble

tbran

Guest
hmmm. Sounds like the valve was not making contact and when you bumped it it turned on, then off, then on. It takes pressure to stroke the pump motors, hard to believe it is 'stuck' in rwa with pressure going to stroke the pumps. Strange things happen. If you have a blown fuse check the wire and solenoid for short. If the coil is super hot it has broken down with too much resistance.
 

Bean_grower

Guest
Which valve do you meanIJ I assume the main one in the RWA axle with the solenoid. I haven't taken time to check anything out since I posted since we went to thrashing kidney beans and the l3 is just sitting in the shed. I'll check the solenoid valve and I hope that is the problem since I think that would be the easiest thing to fix. Is it possible that that valve could have gone bad and made the solenoid break down in turn causing the fuse to blowIJ I did replace the blowen fuse a week ago and it didn't blow right away but after a few hours it had blowen. Thanks
 
 
Top