Combines Transition cone

Wolffman

Guest
Mac, I used a loewen three years ago on a 1688. Their stock one is thicker than the original CIH and it had more bolts in the vains. It was a bugger getting the holes lined up with cage, but the mechanic said CIH cones can be difficult too. Maybe I should be working for loewen! I've been pleased with their parts. Many times at less than half cost of CIH and usually thicker metal.
 

tile4u

Guest
We used loewen, thru Worthington Ag. A dollar is a dollar. Good luck.
 

Mac

Guest
Decided to go with a loewen, then found out I could not get one right away so I just built up the thin areas with hard surface rod. I have the rotor out for a new drive hub and don't want to wait as I have other projects to do in the shop. Thanks for the replies