NDDan Guest Sep 24, 2007 #1 I'd check into the different plug kit for end of swing cylinder for it has a dampner built into it to cushion the end of cylinder stroke. Should be able to find in N series parts manual. Best of luck
I'd check into the different plug kit for end of swing cylinder for it has a dampner built into it to cushion the end of cylinder stroke. Should be able to find in N series parts manual. Best of luck
NDDan Guest Sep 25, 2007 #2 Found P_N today and still have a couple in bin. P_N 71347724 They are a hair over $100US hurttequipment.com
Found P_N today and still have a couple in bin. P_N 71347724 They are a hair over $100US hurttequipment.com
kw Guest Sep 25, 2007 #3 How much height gain would we expect, and how much does it take to put it in. Thanks, kirk
NDDan Guest Sep 26, 2007 #4 Access plug at end of cylinder up in hopper. Remove old plug and install new. Memory says it gains you about a foot. Good luck
Access plug at end of cylinder up in hopper. Remove old plug and install new. Memory says it gains you about a foot. Good luck