Combines Field Tracker pot

[shellman]

Automatic leveling on field tracker is controlled by a switch on the upper left corner of the feeder house immediately below the feeder position pot. When this switch closes a fixed resistor value is substituted for the balance pot on the right hand console. I would throughly check the linkage on the pot and make sure the balls are not frozen or loose and worn. It may also be possible that the arm may be slipping on the shaft. Do you always have to adjust the same direction or do you sometimes have to adjust in opposite directionsIJ E-mail if you have other questions.

 

[Oly]

Thanks for the advice shellman. I'll check it out in the morning.We are harvesting soybeans in western iowa.