Combines F3 chain wear on chaffer

[Tom_in_Michigan]

Our F2 has the same issue. We have adjusted the chain many times and it still contacts the bracket. However, ours is more annoying then critical; the chains knocks the paint off of the arm and shines it up, but no noticeable wear. Keep us posted if you get a fix for it. Tom

 

[sidekick]

My F2 has notches cut on the shaker pin too.I think I will mount a wood block on top side just behind pin to keep it from flopping up that high.The framework has a hole on that angled piece just like down at the shoe guides.Should be able to fab up a bracket there for block.

 

[mark]

We added an extra block to our F3 to take up chain slack and address that problem. We just fabracated the bracket and bolted it to the combine