skinnb
Guest
New to Rotors, I would have the rotor pulled and check rotor drive bushings if worn replace with new bolts (between the rotor and gearbox). Check for bent vanes in cone and rotor housing also look for cracks and worn boltheads in rotor housing (cracks around right hand support). The custom cutter package now includes stainless vanes (thicker) Case offers a kit for this. Depending on the raspbar type you may need to replace the bars over 1,2,3 concaves. If you have a large ac of wheat smallwire concaves may help. We run 2,3 smallwire. If you ocasionally have weeds they will stop up a smallwire n1 concave. On the yield monitor you may want to upgrade moisture sensor to a sidemount. It gives a more accurate moisture reading. Welcome to the "Rotor" and good luck.